• 1
>
新闻详情

Chongqing Xinchaoli Bearing Co., Ltd.

No.886 Xiangyu Road, Konggang Industrial Park, Yubei District, Chongqing

phone:+86-23-67189052

mailbox:cxcl@vip.163.com

Sales call:+86-23-6721-9646
fax:+86-23-6715-9511

all rights reserved:Chongqing Xinchaoli Bearing Co., Ltd.

YuICP No. 09014648​    

Powered By: www.300.cn

contact number

+86-23-67189052

预埋槽道系统

坚朗在质量上坚持高标准、严要求,没有任何通融的余地;无论是产品质量,还是服务质量,都应做到零缺陷、零投诉,最终做到客户满意。

吊架系统

托臂支架系统

预埋槽道系统

抗震支撑系统

坚朗在质量上坚持高标准、严要求,没有任何通融的余地;无论是产品质量,还是服务质量,都应做到零缺陷、零投诉,最终做到客户满意。

坚朗在质量上坚持高标准、严要求,没有任何通融的余地;无论是产品质量,还是服务质量,都应做到零缺陷、零投诉,最终做到客户满意。

坚朗在质量上坚持高标准、严要求,没有任何通融的余地;无论是产品质量,还是服务质量,都应做到零缺陷、零投诉,最终做到客户满意。

Page up
1
2
...
6

预埋槽道系统

坚朗在质量上坚持高标准、严要求,没有任何通融的余地;无论是产品质量,还是服务质量,都应做到零缺陷、零投诉,最终做到客户满意。

How to maintain shielded bearings

  Many bearings are used in an environment which is conducive to dust, dirt and grime. Because of this they usually need to be maintained at regular intervals to make sure they work correctly. Some bearing have shields which can protect the bearing to some extent. However, these still need to be maintained occasionally.
 
  The shields on bearing can usually be removed easily. All you have to do is insert a clean knife carefully under the shield and prise it away. When you clean the shields make sure you use a solution which doesn’t contain a solvent based product as it can damage the rubber. When they are removed however the bearings can be cleaned as you wish. A good way to clean a small bearing is to place it in a jar of cleaning solution, and with the lid tightened, which can be agitated to remove the grease and grime.
 
  The solution can be changed a few times and the bearing shaken until no grease or grime remains and the cleaning solution remains a clear colour. After the bearing is completely dry you can relubricate the bearing with the recommended lube or grease and refit the shields.