• 1
>
新闻详情

Chongqing Xinchaoli Bearing Co., Ltd.

No.886 Xiangyu Road, Konggang Industrial Park, Yubei District, Chongqing

phone:+86-23-67189052

mailbox:cxcl@vip.163.com

Sales call:+86-23-6721-9646
fax:+86-23-6715-9511

all rights reserved:Chongqing Xinchaoli Bearing Co., Ltd.

YuICP No. 09014648​    

Powered By: www.300.cn

contact number

+86-23-67189052

预埋槽道系统

坚朗在质量上坚持高标准、严要求,没有任何通融的余地;无论是产品质量,还是服务质量,都应做到零缺陷、零投诉,最终做到客户满意。

吊架系统

托臂支架系统

预埋槽道系统

抗震支撑系统

坚朗在质量上坚持高标准、严要求,没有任何通融的余地;无论是产品质量,还是服务质量,都应做到零缺陷、零投诉,最终做到客户满意。

坚朗在质量上坚持高标准、严要求,没有任何通融的余地;无论是产品质量,还是服务质量,都应做到零缺陷、零投诉,最终做到客户满意。

坚朗在质量上坚持高标准、严要求,没有任何通融的余地;无论是产品质量,还是服务质量,都应做到零缺陷、零投诉,最终做到客户满意。

Page up
1
2
...
6

预埋槽道系统

坚朗在质量上坚持高标准、严要求,没有任何通融的余地;无论是产品质量,还是服务质量,都应做到零缺陷、零投诉,最终做到客户满意。

For further strengthen the foundation of “Bearing 2014”, CBIA visited CCMA

  Recently, in order to further strengthen the foundation of China International Bearing Industry Exhibition, promote the fair, publicise bearing enterprises and the development of bearing products, Niu Hui, Vice Secretary General of China Bearing Industry Association (CBIA), Yang Lixin, Vice General Manager of CBIA (Beijing) Exhibition Co.,Ltd. visited China Construction Machinery Association (CCMA). Lv Ying, Vice Secretary General of CCMA gave them a warm reception.
 
  Mr. Niu Hui expressed his sincere thanks to CCMA. He said, under the great support and help of CCMA, CBIA first held the face to face meeting between construction machinery and bearings development during 2012 China International Bearing Industry Exhibition. The meeting has made some achievements and effects. Mr. Niu hoped that CCMA could offer their support again during Bearing 2014.
 
  Lv Ying, Vice Secretary General of CCMA said that we both a part of China's machinery industry, China machinery industry cannot do without the important basic pieces of machinery bearings, similarly, construction machinery also cannot do without bearings and the development of bearing industry. Mutual help and support between the two associations were necessary.
 
  After introduced the economic operating situation of each industry, the two associations discussed about the exhibition publicity, web links, publications, and reached a preliminary intention for future cooperation.
 
  China Construction Machinery Association (CCMA) is a registered national construction machinery industry organization officially approved by the Ministry of Civil Affairs of the people’s Republic of China, which is a social organization with the legal person position voluntarily established by and consisting of the manufacturers, institutes, universities, service providers and other construction equipment related entities in the construction machinery industry. Our professional authority is State-owned Assets Supervision and Administration Commission of the State Council (SASAC).
 
  The current CCMA is the consolidation of former CCMA and China Building Machinery Association. CCMA now has more than 2,100 members, covering over 85% of the whole industry. The memberships include the relevant units from more than 10 sectors such as Machinery, Urban Construction, Transportation, Railway, Metallurgy, Coal, Building Materials, Oil and Natural Gas, Water Conservancy, Electric power, Forestry, Military Industry and Aviation, distributed at all the Provinces, Municipalities and Autonomous Regions except for Taiwan and Tibet.
 
  CCMA has set up 30 Bureaus or committees according to the product categories and working performance. The products of the memberships include 20 Categories such as Earth Moving Equipment, Excavating Equipment, Lifting Equipment, Industrial Vehicles, Pavement and Maintenance Equipment, Compaction Equipment, Rock Drilling Equipment, Pneumatic Tools, Concrete Equipment, Boring Equipment, Concrete Product Equipment, Piling Machinery, Municipal and Utility Equipment, Arial Working Equipment, Decoration Equipment, Re-bar and Pre-stressed Concrete Machinery, Construction Machinery for Army, railway construction machinery, Elevator and Escalator, Other Specialized Construction Equipment, Parts and Components for Construction Machinery.
 
  The Association aims to provide services to enterprises, government and customers and to stimulate the development of Chinese construction machinery industry. The Tasks of the Association are to protect the legal rights of the memberships, reflect the wills and requirements of memberships, coordinate the internal relations within the industry, carry out the state laws, regulations and policies, stipulate the rules and specifications for the industry, put forward the policy suggestions stimulating the industry development, assist the government to perform the macro industry management, fulfill the preparatory work of industry development planning and play the bridging and liaison role between government and enterprises.
 
  The Association has close relations with enterprises and customers and proactively serves the enterprises and customers. The Association has done lots of work in such aspects as planning, information, statistics, exhibition, product research and development, marketing, organizational adjustment, customer services, quality, consulting and pricing. The Association has establishes wide contacts with foreign associations and enterprises in this industry and contributed to the advances technology introduction, introduction of foreign funds, international technical cooperation and exchange, and the improvement of enterprises’ economic benefits and product quality.
 
  The 14th China International Bearing Industry Exhibition (BEARING 2014’) will be held by China Bearing Industry Association in Shanghai World Expo Exhibition & Convention Center from September 18 to 21, 2014. The exhibition is expected to cover an area of 45000Sq.m. In the same time, International Bearing Summit Forum and a series of events will continue to be held.
 
  China International Bearing Industry Exhibition, since it first held by China Bearing Industry Association in 1990, has been passed more than 20 years with 13 successful sessions. It has been the world largest fair in the field of bearing industry. By the year of 2012, the 13th session gathered about 800 exhibitors from 17 countries and regions and more than 50000 professional visitors. The exhibition area reached to 45000Sq.m. During the exhibition, International Bearing Summit Forum, seminars, and meetings were held successfully. Main contents involved in the development of bearing industry, the connection between production and demand, technical communication, trade cooperation, and business negotiation.
 
  2012 the face to face meeting between construction machinery and bearings industry was held at No. 7 meeting room, B2 floor of Shanghai World Expo Exhibition & Convention Center on 9:30am, Sep. 21. The meeting was co-hosted by Lv Ying, Vice Secretary General of China Construction Machinery Association (CCMA) and Lu Gang, committee member of China Bearing Industry Association (CBIA). On behalf of construction machinery and bearing industry, more than 30 delegates attended the meeting. Such as FuWa Heavy Industry, Linyi Engineering Machinery, LYC, Xiangyang Bearings, Hailin, Continents Xinchun, Changzhou Guangyang, Chongqing Changjiang, C&U, Suzhou Bearings and so on.
 
  Participants listened to the report of construction machinery development status at home and abroad by Mr. Lv Ying. Who passed a lot of industry, market, and technical information. In the view of expert, Mr. Lv forecasted the development trend of the main categories of construction machinery products. His report had realistic guidance significance for two industries’ development, warmly welcomed by the participants.
 
  Mr. Lu Gang had a speech about current development situation of bearing industry, transformation and upgrading, technology and quality progress, and how to meet the needs of users. He required enterprises to take a positive attitude to face the current situation, complete the process and quality improvement, make technical preparation, study the product trend of main equipment enterprises, research the technology trend of bearings and main equipments home and abroad, collect potential energy for the development of enterprises.
 
  Mr. Ban Yungang, senior engineer of FuWa Heavy Industry put forward his hope to discuss the following technical questions with bearing enterprises. They were the efficiency of pulley bearings, installation tolerances, and the effect of temperature on the lubrication.
 
  The representatives from enterprises expressed their gratitude to CBIA and CCMA for organized this meeting. They introduced their companies and raised hopes of regularly communication between bearings and main equipments enterprises, and realize the win-win situation.